Shop for

1 to 7 of 7 products for

xlr splitter box

  1. SP 8 Splitter
    Millenium SP8 splitter box; 2-4 or 1-8 operation, balanced XLR in/out, input level control (-12db to +12db), internal power supply (230V 50Hz, 2.5VA), max. input level +18dBm, input impedance 20 kOhms, max. output level +18dBm, output impedance 200...
    Read More

    See prices for: 

    In Stock

    See item
    £88.00
    See It
    at cyberstore thomann UK
  2. Redeye 3D Phantom Splitter Box
    Little Labs Redeye 3D Phantom - passive DI/re-amp/expansion splitter unit, 1/4"" TRS instrument input, 1/4"" TRS instrument re-amp output, XLR line in, mic level out (XLR), expansion I/O (1/4"" TRS), phase invert, pad switch.
    Read More

    See prices for: 

    In Stock

    See item
    £328.00
    See It
    at cyberstore thomann UK
  3. RJ45 DMX Split Box FX4
    Stairville RJ45 DMX Split Box FX4 XLR female. Cable splitter for DMX via CAT cable applications., RJ45 socket to 4x DMX XLR 3-pin female sockets, colour: black

    See prices for: 

    In Stock

    See item
    £24.90
    See It
    at cyberstore thomann UK
  4. 6-Inch XLR Female to Dual XLR Male Y Splitter Audio Cable for any ...
    NOTE: Cable ONLY! Other Devices in the pictures NOT INCLUDED! Description: Neewer XLR Female to Dual XLR Male Y Splitter Cable is designed to connect an XLR output to two XLR inputs. Compatible with any XLR connection-microphones, mixers, camcorders, speakers, etc. Features: Connectors: XLR Female to Dual XLR Male Solid construction with oxygen-free copper (OFC) conductors XLR connectors with internal strain relief Ideal for assigning the signal from a microphone to two channels on a mixing console Length: 6" / 15cm Weight: 2.75oz / 78g Package Contents: 1 * Y Splitter Cable 1 * Leather Box
    Read More

    See prices for: 

    In Stock

    See item
    £11.09
    See It
    at Amazon (Consumer Electronics)
  5. 6-Inch XLR Female to Dual XLR Male Y Splitter Audio Cable for any ...
    NOTE: Cable ONLY! Other Devices in the pictures NOT INCLUDED! Description: Neewer XLR Female to Dual XLR Male Y Splitter Cable is designed to connect an XLR output to two XLR inputs. Compatible with any XLR connection-microphones, mixers, camcorders, speakers, etc. Features: Connectors: XLR Female to Dual XLR Male Solid construction with oxygen-free copper (OFC) conductors XLR connectors with internal strain relief Ideal for assigning the signal from a microphone to two channels on a mixing console Length: 6" / 15cm Weight: 2.75oz / 78g Package Contents: 1 * Y Splitter Cable 1 * Leather Box
    Read More

    See prices for: 

    In Stock

    See item
    £11.09
    See It
    at Amazon Marketplace (Consumer Electronics)
  6. DI20
    Behringer DI20 Ultra-DI - active 2-channel DI box, jack in, XLR out, -20/40dB pad (up to 3000W), 9V battery or phantom powered (15-52V), ground lift, battery off switch, also doubles as 2-way signal splitter. Dimensions: 150 x 130 x 60 mm. Weight:...
    Read More

    See prices for: 

    In Stock

    See item
    £24.90
    See It
    at cyberstore thomann UK
  7. PPB 10
    Palmer PPB10 Press Patch Box - balanced transformer isolated audio splitter with 1x female XLR line input and 10x male XLR outputs, ground lift switches on all inputs and outputs, adjustable input level with LED display, adjustable headphones output,...
    Read More

    See prices for: 

    In Stock

    See item
    £990.00
    See It
    at cyberstore thomann UK
  8. DI-PRO DI-Box
    Millenium DI-Pro - professional passive DI box - Haufe transformer, XLR/jack in, XLR/jack link, XLR/jack out (Haufe transformer), ground lift switch. Dimensions: 107 x 94 x 40mm.

    See prices for: 

    In Stock

    See item
    £58.00
    See It
    at cyberstore thomann UK
  9. Cable GL Isojack XLR male/jack
    Sirus Pro Cable GL Isojack, 3,5mm Minijack male - XLR male, 1,5m, integrated passive DI box with 600/600 Ohms, frequency response of 20 Hz -. 20 kHz (+/- 0.5 dB)

    See prices for: 

    In Stock

    See item
    £9.50
    See It
    at cyberstore thomann UK
  10. Sea Salt Flakes in Box 250 g
    CANFORD PRO-INTERFACE MK.2 BI-DIRECTIONAL, SINGLE STEREO FREESTANDING CANFORD ITEM CODE 20-181 A bi-directional stereo interface for matching "semi-pro" or "domestic" equipment, including cassette machines, video recorders and DAT machines for example, to the higher audio levels and differing connection methods of "professional" environments. This rugged design is constructed in an extruded box, with four XLR connectors on the front panel. Two are female, connecting to high-impedance, electronically balanced, line-level inputs, whilst the remaining two are male, fed from electronically-balanced low-impedance, line-level outputs. These four connections are to interface with the "professional" environment, but may also be connected unbalanced without loss of level. They are designed to connect with up to 100m FST cable (or similar) to standard line-level (low source, high or "bridging" load impedance) interfaces. The rear panel has four RCA(phono) connectors to connect to the "semi-pro" device. All are connected unbalanced, and have an adjacent associated multi-turn gain controls to adjust the operating level of the attached device to the line-up level of the "pro" environment. An IEC inlet with fuse provides connection to the mains supply. Technical Specification Unbalanced to balanced sections Input impedance: 47kohm Maximum input level: +22dBu Nominal gain range: 0dB to +25dB Load impedance: >500ohm Output noise: -94dB RMS re +8dBu O/P (20Hz-22kHz, +14dB gain), (Input terminated 600ohm) Harmonic distortion: 0.005%THD (1kHz, +8dBu O/P) Frequency response: 20Hz-20kHz ±0.1dB Maximum output level: +26dBu (10kohm load), +24dB (600ohm load) Balanced to unbalanced sections Input impedance: 20kohm Maximum input level: +22dBu Input CMRR: 70dB, typical Nominal gain range: -25dB to 0dB Load impedance: >1000ohm Output noise: -94dB RMS re +8dBu I/P ( 20Hz-22kHz, -14dB gain)
    Read More

    See prices for: 

    In Stock

    See item
    £8.99
    See It
    at Amazon (Home Improvement)
  11. MZFS 80/80 cm with Microphone XLR Adapter
    'Box contents: tripod 80 cm. XLR ADAPTOR designed for live install sound "

    See prices for: 

    In Stock

    See item
    £294.53
    See It
    at Amazon (Consumer Electronics)
  12. DXA - 2T Audio compact Adapter for Camcorder with Microphone, Line Input ...
    A passive device for small compact camcorders. A threaded screw and retractable azimuth pin connects the box to the camcorder, and a tripod bush is provided in the base. Two XLR inputs are transformer balanced. An auxiliary input is provided as an unbalanced 3.5mm jack socket, which injects signals, such as radio microphones into the right channel. The output is unbalanced, at microphone level; a 3.5mm stereo jack socket and supplied output cable, terminates in a right-angled, 3.5mm stereo jack plug. Each channel has a switch to select microphone or line level, and a mono/stereo switch allows the connection of a mono input to both channels. A ground lift switch assists in removing annoying hum components. Inputs: Microphone -35dBu nominal, -6dBu maximum (ideal), for low impedance microphones. Line: -10dBu nominal, +4dBu maximum (ideal), high impedance. Response: 20Hz to 20kHz +/-3dB. Chassis: Die-cast aluminium, with shaped plastic bezel offering protection of controls and switches. Optional RB2T rubber sleeve available for additional scratch protection. Dimensions: 95 x 64 x 38 (l x w x h)mm. Weight: 280g. Included accessories: 3.5mm stereo to 3.5mm stereo output cable. Optional accessories: RB2T rubber sleeve for additional scratch protection.
    Read More

    See prices for: 

    In Stock

    See item
    £182.36
    See It
    at Amazon (Consumer Electronics)
  13. Sea Salt Flakes in Box 250 g
    CANFORD PRO-INTERFACE MK.2 BI-DIRECTIONAL, SINGLE STEREO FREESTANDING CANFORD ITEM CODE 20-181 A bi-directional stereo interface for matching "semi-pro" or "domestic" equipment, including cassette machines, video recorders and DAT machines for example, to the higher audio levels and differing connection methods of "professional" environments. This rugged design is constructed in an extruded box, with four XLR connectors on the front panel. Two are female, connecting to high-impedance, electronically balanced, line-level inputs, whilst the remaining two are male, fed from electronically-balanced low-impedance, line-level outputs. These four connections are to interface with the "professional" environment, but may also be connected unbalanced without loss of level. They are designed to connect with up to 100m FST cable (or similar) to standard line-level (low source, high or "bridging" load impedance) interfaces. The rear panel has four RCA(phono) connectors to connect to the "semi-pro" device. All are connected unbalanced, and have an adjacent associated multi-turn gain controls to adjust the operating level of the attached device to the line-up level of the "pro" environment. An IEC inlet with fuse provides connection to the mains supply. Technical Specification Unbalanced to balanced sections Input impedance: 47kohm Maximum input level: +22dBu Nominal gain range: 0dB to +25dB Load impedance: >500ohm Output noise: -94dB RMS re +8dBu O/P (20Hz-22kHz, +14dB gain), (Input terminated 600ohm) Harmonic distortion: 0.005%THD (1kHz, +8dBu O/P) Frequency response: 20Hz-20kHz ±0.1dB Maximum output level: +26dBu (10kohm load), +24dB (600ohm load) Balanced to unbalanced sections Input impedance: 20kohm Maximum input level: +22dBu Input CMRR: 70dB, typical Nominal gain range: -25dB to 0dB Load impedance: >1000ohm Output noise: -94dB RMS re +8dBu I/P ( 20Hz-22kHz, -14dB gain)
    Read More

    See prices for: 

    In Stock

    See item
    £10.37
    See It
    at Amazon Marketplace (Home Improvement)
  14. M-DMX / M-PC 2U USB DMX Box
    Martin M-DMX / M-PC 2U USB DMX Box. The Martin M-DMX interface has two 5-pin XLR female connectors, for, DMX 512. The interface communicates with Martin Light Jockey, (with Martin One-Key), the consoles, M-series, M-PC, and Martin Show Designer 6...
    Read More

    See prices for: 

    In Stock

    See item
    £249.00
    See It
    at cyberstore thomann UK
  15. RJ45 DMX Split Box MX4
    Stairville RJ45 DMX Split Box MX4 XLR male for DMX Artnet / Ethernet applications., RJ45 socket to 4x DMX XLR 3-pin male sockets, colour: black

    See prices for: 

    In Stock

    See item
    £24.90
    See It
    at cyberstore thomann UK
  16. Pyrit 112 Sub A
    the box Pyrit 112 Sub A, Active High Power Subwoofer, Equipped with: 12"" Speakers with 4"" Voice coil, Power: 500 W RMS, 2000 W Peak, Peak SPL: 126 dB, Frequency range: 45 - 150 Hz, Stereo XLR / Jack Combo Input and XLR / Jack Combo Line Out, M20...
    Read More

    See prices for: 

    In Stock

    See item
    £389.00
    See It
    at cyberstore thomann UK
  17. Achat 112 Sub A WH
    the box pro Achat 112 Sub A WH, Active 12"" Subwoofer, 350 W, SPL 124dB Max, Frequency range 40 Hz - 250 Hz, XLR/Jack input (combo jack) XLR output, Stand mount flange M 20, Dimensions : 450 x 456 x 370 mm, Weight 22 kg, Matching protective cover is...
    Read More

    See prices for: 

    In Stock

    See item
    £318.00
    See It
    at cyberstore thomann UK
  18. Achat 108 Sub A
    the box pro Achat 108 Sub A, Active 8"" Subwoofer, Power: 220 W - 100 W sub, 2x 60 W top parts, Peak SPL: 116 dB, Frequency range: 40 - 125 Hz, XLR/ jack combi and RCA input, Speaker twist output for top - each 60 Watt, crossover frequency: 120 Hz,...
    Read More

    See prices for: 

    In Stock

    See item
    £189.00
    See It
    at cyberstore thomann UK
  19. 8 Stage Box (XLR Connector, 15m Cable)
    Stage BoxesFor multi-way signal transmission between stage and mixer, with different numbers of signal ways and different cable lengths. Stage box in aluminium design with robust carrying handle.Standard series:Multipair cable, STB-84, STB-80/20, STB-80: 60cm spliced; STB-124, STB-164, STB-244: 70cm spliced All signal ways are balanced with 2 cores and shielding XLR connectors STB-124, STB-164 and STB-244 with aluminium strain relief and cable bending protection Technical SpecificationSignal ways: 8In- puts: 8Out- puts: 0Dimensions: 165x90x130mmWeight with cable: 4kgCable length: 15m
    Read More

    See prices for: 

    In Stock

    See item
    £116.28
    See It
    at Amazon (Consumer Electronics)
  20. MA8/2 CL Aktiv-Monitor
    the box MA8/2 CL, Active Monitor, Power: 70 W, Equipped with: 8"" Loudspeaker and tweeter, Frequency range: 80 - 20,000 Hz, Volume control, XLR/Jack combi socket, Floor monitor angle, M8 Thread for stand mounting (right side wall) - Adapter: Article Nr...
    Read More

    See prices for: 

    In Stock

    See item
    £109.00
    See It
    at cyberstore thomann UK
  21. Pyrit 212 Sub A
    the box Pyrit 212 Sub A, Active High Power Sub 2x 12"" with 4"" Voice Coil, 1000 Watt RMS, 4000 Watt Peak, Peak SPL: 132 dB, Stereo XLR Jack Combi Input and Line Out, 2x Pole Mount 36mm, Black textured coating, Frequency Range: 31,5 Hz - 120 Hz,,...
    Read More

    See prices for: 

    In Stock

    See item
    £611.00
    See It
    at cyberstore thomann UK
  22. Achat 804 A MKII
    the box pro Achat 804 A, Aktiver 8 x 4"" Woofer and 1"" BMS Driver, Column Speaker, 350 Watt Amplifier, 4 Ohms, 124 dB Max, Frequency 60 Hz - 20 kHz, Dispersion 150° x 30°, XLR Ein und Ausgang, Black Finish, Dimensions 164 x 1138 x 233 mm, Weight 16,7...
    Read More

    See prices for: 

    In Stock

    See item
    £429.00
    See It
    at cyberstore thomann UK
  23. Achat 404 A
    the box pro Achat 404 A, Active Mid/High Speakers, Speakers: 4x4"" bass and 1"" BMS line driver, Line source housing (Column), 200 W power, 124 dB Max, Frequency range: 160 Hz - 20 kHz, Dispersion: 150° x 30°, Stand mount flange: 36 mm, Connectors: XLR...
    Read More

    See prices for: 

    In Stock

    See item
    £415.00
    See It
    at cyberstore thomann UK
  24. Achat 118 A
    the box pro Achat 118 A, Active 18"" Loudspeaker, Powerful horn loaded bass, Road proof construction, Power rating of the power amplifier: 1300 W, Max. SPL: 104 dB (1 W/m), 135 dB (peak), Frequency range: 37 - 150 Hz (-3 dB), 1 x XLR In, 1 x XLR...
    Read More

    See prices for: 

    In Stock

    See item
    £675.00
    See It
    at cyberstore thomann UK
  25. 2 Channel Direct Injection Box
    2-channel DI box 3-fold attenuation switch (0/-20/-40dB) for each channel 1 ground lift switch for each channel 1 instrument feed-through output for each channel Wideband balancing transformer Robust metal housing tools4music 06/2009 on LSP-102, LC-31, FGA-102, FGA-202, DIB-102 "Recommendable and fit for the road. A little audio helper at a favourable price, perfect for the "ever accompanying" toolcase." Technical SpecificationGeneral Information : Frequency range: 15-30,000Hz, ±0dBInputs : 50k?Outputs : 600?, XLR50k?, jackTransmission ratio: 10:1Admiss. ambient temp.: 0-40 °CDimensions: 148x50x130mmWeight : 850gInputs: 2 x 6.3mm jack, unbal. Outputs: 2 x 6.3mm jack, unbal., par. out 2 x XLR, bal.
    Read More

    See prices for: 

    In Stock

    See item
    £8.96
    See It
    at Amazon (Consumer Electronics)
  26. Achat 104 A
    the box pro Achat 104 A, Small Active Speaker, Equipped with: 4"" Bass and 1"" fabric dome tweeter, 50 Watt power amplifier, Max SPL: 109 dB, Frequency range: 100 Hz - 20 kHz, Dispersion: 90° x 90°, Connectors: XLR input and output, Dimensions: 144 x...
    Read More

    See prices for: 

    In Stock

    See item
    £85.00
    See It
    at cyberstore thomann UK
  27. Miniray Slave Sub
    the box Miniray Slave Sub, Mono Slave Subwoofer, Addiotional active subwoofer for the the box miniray system, Output power: 400 W RMS, 800 W peak, Frequency range: 48 - 180 Hz, Adjustable low pass: 80 - 180 Hz, SPL: 96 dB (122 dB max.), Input: XLR/...
    Read More

    See prices for: 

    In Stock

    See item
    £469.00
    See It
    at cyberstore thomann UK
  28. CL 118 Sub MK II
    the box CL 118 Sub MK II, Active 18"" Subwoofer, Power: 350 W RMS / 700 W Peak + 2x 220 /500 W RMS / Peak for the Top speakers, Peak SPL: 124 dB, Internal crossover, Frequency range: 33 - 110 Hz, Input: 2x XLR, 2x 1/4"" jack, Outputs: 2x Speaker Twist,...
    Read More

    See prices for: 

    In Stock

    See item
    £548.00
    See It
    at cyberstore thomann UK
  29. Achat 204 A
    the box pro Achat 204 A, Active Small Loudspeaker, Equipped with 2x 4"" bass and 1"" fabric dome tweeter, Power rating: 80 W RMS/ 320 W Peak, Max. SPL: 112 dB, Frequency range: 90 Hz - 20 kHz, Dispersional pattern: 90° x 90°, XLR input, XLR output/...
    Read More

    See prices for: 

    In Stock

    See item
    £144.00
    See It
    at cyberstore thomann UK
  30. CL 115 Sub MK II
    the box CL 115 Sub MK II, Active 15"" Subwoofer, Power: 220 W RMS / 500 W Peak + 2x 220 / 500 W RMS / Peak for the Top speakers, Peak SPL: 122 dB, Internal crossover, Frequency range: 35 - 130 Hz, Input: 2x XLR, 2x 1/4"" jack, Outputs: 2x Speaker...
    Read More

    See prices for: 

    In Stock

    See item
    £379.00
    See It
    at cyberstore thomann UK


Shop for

Shop at Become.co.uk

If you are having trouble finding exactly what you're looking for refine your product query and filter by category and discover exactly what you've been searching for. Get all the shopping information you need in one spot with holiday shopping guides, comprehensive tip centres and the latest product reviewsSo cut out the stress and add up the savings on Become UK from popular shops and online stores including cyberstore thomann UK and Amazon Marketplace (Consumer Electronics) and enjoy the extra savings!

About Become UK | Shopping Blog | Exava UK

Copyright © 2011 Become, Inc. Terms of Use